***************************
***		Electrics		***
***************************
SPP - Smart Solar Panel with 2 axis rotation, replacing ISP1. Not so good textures, but much better model then was ISP1.
LED - Small flat LED headlight for placement on rovers.

***************************
***		Propulsion		***
***************************
LTS - a system of core tank and jettisonable side tanks with ridges to mount langing legs. Inbuilt Asparagus fuelling. Suitable both for landing and using as a transfer stage

***************************
***		  Rovers		***
***************************

RTG_Rover - contains a rover body, capable of hosting 4 stock RTGs as power source. Still old proof-of-concept model with crappy mesh and texture. Will be changed in next release.
RuggedRover - contains a fully reworked rover body, designed specially for TR2-L Ruggedized Wheels. Special safe trunks for any non-ruggedized side equipment included. Also contains a roof solar panel, fitting for this bigger-than-average rover.

*******************************
***	   Rovers/PimpMyRover	***
*******************************

Since most previosly supported mods are obsolete or incompatible with 0.90, this subproject folder contains only (re)configuration files for stock rover parts and one flat solar panel.
If you feel like wanting to do some necromancy - explore deprecated.zip

***************************
***		Science			***
***************************
DAS-1 - real worls CubeSat double-dipole antenna replica.
SoilSampler - Mechanical soil sample retriever. Still experimental beta.

***************************
***		Skycrane		***
***************************
Deployable Skycranes Mk1 and Mk2 for 1.25m mount / 2.5m payload and 2.5m mount / 5m payload respectively.

***************************
***	Structural/Adapters	***
***************************
Adapter for stock Aerospike engine, allowing it to be used in upper stages.
2.5m hubs: 4-way 2.5m, 3-way 2.5m, 6-way 1.25m. 

***************************
***	Structural/SPP	***
***************************
SpacePlane+ parts. Mainly various butts. =^_^= And a couple of nosecones.

********************************************************************************************
Changelog:

v 0.6.4
- New SpacePlane+ part: Intake nosecone
- New structural parts: 3-way 2.5m hub, 4-way 2.5m hub, 6-way 2.5m to 1.25m hub.
- MM config and some model bugfixes to normalize F.A.R. behavior of SP++ parts. Should fix air intakes problem.

v 0.6.3
Just file cleaning, general tidyup and some bugfixes. All textures are quantized. Most of PimpMyRover configs are deprecated.

v 0.6.2
- New SpacePlane+ parts: Wide Tricoupler (3 x 1.25m + 2 Ram Air intakes, capable of holding LV-N engine) and Drone Nosecone (air intakes, RT and RPM support), both using stock textures.
- configurations for 0.625 jets, aerospike and aerospike adapter.
- 1.25m configuration for SSP Mk1 (model looks quite crappy at 2.5m and above, so it will be SSP Mk2 with another model and animation)
- new sample crafts
- some minor bugfixes

v 0.6.1
- New SpacePlane+ parts: Quadcoupler (2 x 1.25m + 2 x 0.625m) and 2.5m Adapter, both using stock textures.
- Blister stripes are darker to draftly match SpacePlane+ side stripes color.

v 0.6
- New SpacePlane+ parts: Tricoupler (1 x 1.25m + 2 x 0.625m) and Quintcoupler (1 x 1.25m + 4 x 0.625m), both using stock textures.
- TweakScale integration (Blisters and Skycrane)
- ModularFuelTanks and RealFuels integration (LTS and Skycrane)

V 0.5.1
- Rugged Rover and RTG Rover are moved to upper nodes in Tech tree.
- New Aerodynamic blisters (side mounts)(1.25m and 2.5m).
- New Aerodynamic blister decouplers with built-in retro-rockets (1.25m and 2.5m).

V 0.5
- Complete rework of Rugged Rover - it's really fancy now.
- Complete rework of RTG Rover. It won't seem anymore that RTGs don't have enough free space for cooling.
- New LTS landing system introduced to replace experimental Segmented Tanks.
- New SSP solar panels introduced to replace experimental ISP1.
- New DAS-1 Deployable Antenna System. Replica of real CubeSat part.
- New LED headlight for rovers.
- Deployable Skycrane model recieved a bit of mesh tidying. Bigger Deployable SkyCrane Mk2 configured. Working gimbals and overheat animation for both. Though only MK2 is prone to overheat.
- Mechanical Soil Sampler as a way of unmanned soil sample retrieval. Single charge version, as stock animation module failed to work with 3-in-one experimental design. Still the same crappy texture though.
- ChopShop logos were replaced with changeable and toggleable flag decals. You still can get my smile back by chosing the proper flag. =^_^=


v 0.4.1
- New experimental probe-sized solar panel. ISS "Balka"-style 2-axis rotation, but fits in 0.625m design. 
- SkyCrane will autodeploy on engine activation if Bahamuto Dynamics DLL is present.

v 0.4
- New rover body intended for ruggedised wheels placement. Smoothly fits in 3.75m.
- Simple passive solar panel for rover back (alpha).
- Experimental segmented 2.5m fuel tank for upper stages (alpha).
- Finally some mesh tidying, new texture and normalmap for Deployable Skycrane.

v 0.3.3
- Added support for Soviet Pack "Lunokhod 1" (Soviet Pack v1.9.1b).
- Added support for Space Factory Ind. Luna-17.

v 0.3.2
- Added support for Bahamuto Dynamics CritterCrawler.
- Relocated both PimpMyRover and SkyCrane folders into ChopShop folder.

v 0.3.1
- Fixed a bug with "Probodobodyne MastCam" actually facing rearwards while it's camera looking forwards.
- Fixed a bug with Pimped RTG RoveMate part being upside down.

v 0.3
- Deployable SkyCrane was added.

v 0.2
- A new rover core was added, that allows attachment of up to 4 stock RTGs.

v0.1
- Stock Probodobodyne RoveMate part was duplicated and made into two functional rover cores.
- Spacetech "Eva" rover from "SpaceTech Landing Project" was properly reoriented and partly befriended with RasterPropMonitor for use with ProbeControlRoom.